Cleaning - Exsys Ex-1502Hmvs Anleitung

EX-1502HMVS
6. Management Software
The software download also includes the console utility CUSBC, which can be used to control the
USB device. To run it, open the command prompt as follows:
1. Press Win + R to open the Run dialogue.
2. Type cmd and press Enter to open the Command Prompt dialogue.
3. In the command prompt, navigate to the directory where CUSBC is located.
4. Enter CUSBC followed by the commands required to control the USB device.
To display all CUSBC commands:
CUSBC /?
To query all connected hubs:
CUSBC /Q

7. Cleaning

For cleaning please use only a dry fluff less cloth and remove the dirt with gently pressure. In the
area of the connectors please make sure that no fibres from the cloth remain in the connectors.
Attention! Never use a moist or wet cloth for cleaning!
© Copyright 2024 by EXSYS Vertriebs GmbH. All Rights Reserved
15
English