Cleaning And Maintenance Instructions; Technical Service - Dms Ihs-2500 Bedienungsanleitung

8. Cleaning and Maintenance Instructions

Maintenance
Attention! Careful and regular maintenance of Infrared Heater considering our instructions
assume great importance so as to attain a long and efficient operation of your appliance.
1- Check the filthiness of the Reflector and IR-Filament at least once a month. If necessary,
apply cleaning and maintenance instructions.
2- The number of checks may be increased considering the amount of the dust in the
environment.
3- Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance.
In case of any deformation, consult to your technical service.
4- Check the power cord and plug visually while cleaning the appliance. In case of any
deformation, consult to your technical services.
5- It is recommended to change the reflector every 2 years for the purpose of more efficient
operation of you appliance.
Cleaning
Attention! Regular and careful cleaning helps your heater operate for longer years and more
efficiently.
1- Unplug your power cord for your safety before cleaning your appliance.
2- Take out the front grid wire through the inlets on the frame using a slotted screwdriver.
3- Make sure that the power is off for your safety. Power cord plug must be unplugged.
4- The reflector and filament must be cleaned with a soft cloth, a smooth brush or cool or dry air.
The cloth may be damp but never too wet and the cleaner should not include any chemical.
5- Refrain from using cleaning material likely to damage the reflector (cleanser etc.).
6- Insert the wire grid using a slotted screwdriver.

9. Technical Service

Attention!
Only technical services and persons authorized by SUN may serve, repair and replace the spare
parts of this heater.