Dell Precision M6300 Schnellreferenzhandbuch Seite 26

3 If a problem is encountered during a test, a message appears with an error
code and a description of the problem. Write down the error code and
problem description and contact Dell (see "Contacting Dell" in your User's
Guide).
NOTE:
screen. If you contact Dell, support personnel will ask for your Service Tag.
4 If you run a test from the Custom Test or Symptom Tree option, click the
applicable tab described in the following table for more information.
Tab
Results
Errors
Help
Configuration
Parameters
5 When the tests are complete, close the test screen to return to the Main
Menu screen. To exit the Dell Diagnostics and restart the computer, close
the Main Menu screen.
6 Remove the Dell Drivers and Utilities media (if applicable).
26
Quick Reference Guide
The Service Tag for your computer is located at the top of each test
Function
Displays the results of the test and any error conditions
encountered.
Displays error conditions encountered, error codes, and the
problem description.
Describes the test and may indicate requirements for running
the test.
Displays your hardware configuration for the selected device.
The Dell Diagnostics obtains configuration information for
all devices from system setup, memory, and various internal
tests, and it displays the information in the device list in the
left pane of the screen. The device list may not display the
names of all the components installed on your computer or
all devices attached to your computer.
Allows you to customize the test by changing the test
settings.