How To Add Cat Litter; How To Use The Waste Bags For The; Waste Tray - M-Pets Smart M600 Bedienungsanleitung

Installation Instructions

2. How to add cat litter

Carefully
remove the top
cover.
Suitable cat litter types: clumping bentonite cat litter, clumping mineral litter,
clumping soya cat litter, and mixed clumping litter. All cat litter must have a
Notes
diameter less than 3mm and a length less than 30mm.
3. How to use the waste bags for the waste tray
Pull out the

waste tray.

Pour the
recommended
amount of
clumping cat
litter through the
top opening on
the rotating
drum.
(Typically 4
liters is
recommended
for the initial
setup.)
Remove the
waste bag holder.
Ensure that the
added cat litter
does not exceed
the maximum
measurement
line (MAX) or
fall below the
minimum
measurement
line (MIN)
inside the drum.
Secure the waste
bag to the front
two clips first,
then pull it
backwards over
the rear two
corners.
EN
Place the top
cover back on
the litter box.
Quickly double-
click the
cleaning button
to calibrate the
weight of the cat
litter. Once the
weight
calibration is
completed, the
buzzer will
sound three
times.
Reattach the
waste bag holder,
then put the tray
back into the
automatic cat
litter box.