Baninni INIGO Gebrauchsanleitung Seite 12

1. Put all the legs together.
2. Put the leg covers on the legs with the four corners facing outwards to
provide a stable leg.
3. Insert the four legs one by one into the holes of the base to
secure the latch to the base.
4. The connecting frame:
4.1 First attach the longest iron tube to the middle part of the rear legs with
a shorter screw.
4.2 Then insert one end of the short iron tube and tighten it with a nut. The
end of the short tube is not installed for now.
4.3 Then connect the footrest with a longer screw. Connect the other end of
the short iron tube to the back and tighten it with a nut. Note! The connecting
frame must be installed before using the high chair.
5. Place the seat in the base, and secure the seat with the safety locks so that
the seat cannot come loose.
6. Pull the leather cover over the seat.
7. Attach the safety harness to the seat.
8. Click the lower plate and frame into the high chair. You can adjust the
placemat so you can easily put your child in and out of the high chair.
9. You can also lower the height of the high chair. Do this by dismantling the
legs from step 1.