Using Your Ceramic Hob; How To Start - Amzchef Fs-R32V-Qs01B Bedienungsanleitung

Using your Ceramic Hob

How to Start?

1.When the power cord is successfully connected, the cooktop Will emit a beep sound once, the
display screen will flash once.The appliance is in stand-by mode now.
2.Place a cookware on the desired cooking zone. Always keep the bottom of the
cookware as well as the cooking zone clean and dry.
3.Touch the ON/OFF button,a beep sounds once, the indicator light will come on.
4.Press the HEATING ZONE SELECTION button, the corresponding indicator shows"-".
5.Set the power level with the "+" or "-"button.After setting the power level, it will flash 10 times
and then confirm.
When you first touch + button, the display will show 9 representing the default working power is
level 9.
When you first touch - button, the display will show 1 representing the default working power is
level 1.
a.If the power level is not set within 10 seconds, the cooking zone display will automatically turn
off. You must start over from step 4.
b.You can change the power level at anytime during the cooking process.You can change the power
level by pressing the "+" or "-" button.
English
or
72