VEVOR GSB1 Originalanleitung Seite 18

PROBLEM
Bumer not be ignited
with an igniter
Low flame or
flashback (fire in
bumer tube-a hissing
or roaring noise may
be heard)
Knob light is not on or
crosstalk(For products
with lights )
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
Trouble shooting methods
POSSIBLE CAUSE
1.LP gas cylinder is empty
2.Faulty regulator
3.Obstructions in burner
4.Obstructions in gas jets
or gas hose
1. LP gas cylinder too
small
2.Obstructions in burner
3.Obstructions in gas jets
or gas hose
4.Windy conditions
1.Knob not installed
properly
2.Check that the power
adapter
plug is properly installed
3.Check whether the power
line is
short-circuited
- 17 -
SOLUTION
1.Replace with full
cylinder
2.Have regulator
checked or replace
3.Clean burner
4.Clean jets and gas
hose
1.Use larger cylinder
2.Clean burner
3.Clean jets and gas
hose
4.Use Product in a more
sheltered position
1.Press the knob to the
correct installation
position
2.Reinstall the power
adapter plug
3.Find a professional
connection repair