Werbung
Verfügbare Sprachen
Verfügbare Sprachen
there is a minimum distance of 122cm from the side or rear of the
appliance. It is important that the ventilation openings of the appliance are
not obstructed. The product must be used on a level, stable surface or
embedded use.The appliance should be protected from direct draughts
and shall be positioned or protected against direct penetration by any
trickling water (e.g. rain)
Make sure that the gas cylinder compartment (if any) is not obstructed,
keep it ventilated and clean.
Parts sealed by the manufacturer or his agent must not be altered by the
user.
Only one gas cylinder may be attached to the appliance at any one time.
Do not fill the gas cylinder beyond 80% capacity.
No modifications should be made to any part of this product and repairs
and maintenance should only be carried out by a CORGI registered
service engineer.
Connection to Appliance
can lead to a fire beneath the appliance.
Clean burer holes with a heavy-duty pipe cleaner.
Fit the hose to the appliance using a spanner to tighten it onto the
connection thread. If the hose is replaced it must be secured to the
appliance and regulator connections with hose
clips.Disconnect the regulator from the cylinder (according to the directions
supplied with the regulator) when the barbecue is not in use.
The Product must be used in a well ventilated area. Do not obstruct the
flow of combustion air to the bumer when the product is in use.ONLY USE
THIS PRODUCT OUTDOORS.
BEFORE USE CHECK FOR LEAKS
Never check for leaks with a naked flame, always use a soapy water
solution
- 14 -
Werbung
