Candy Fresco Installationsanleitung Seite 8

1
Safety warnings for installation
Observe these directions before beginning the installation of the product.
Please observe the following guidelines before starting the installation of the product. Your
safety is very important to us. Read these instructions carefully before using the product.
•
The installation must be carried out by a qualified technician who is familiar with and adheres to the
applicable laws in the country of installation and the manufacturer's instructions;
•
If assistance from the manufacturer is required to rectify faults resulting from incorrect installation,
such assistance is not covered by the warranty;
•
Remove the packaging material before operating the appliance;
•
After unpacking the product, check that it is not damaged. In case of any issues, contact the service
center before proceeding with installation and do not connect it to the power supply;
•
A damaged product can cause a short circuit, electric shock, fire hazard, and other dangers;
•
Check for any accessories or supplementary materials (bags with screws, documents, brochures,
etc.) in the packaging and, if present, remove and store them;
•
Before installing the appliance, ensure that ventilation is sufficient to allow the proper circulation of
fresh air needed for cooling and protecting the internal components. Depending on the type of set-
up, create the specified openings as illustrated;
•
If manufacturer assistance is needed to rectify any faults due to incorrect installation, such assistance
is not covered by the warranty. Follow the installation instructions provided for qualified personnel;
•
Incorrect installation can cause damage or injury to people, animals, or property. The manufacturer
cannot be held responsible for such damage or injury;
•
Safe usage is guaranteed only if the installation has been carried out correctly according to these
instructions. In case of damage due to incorrect installation, the responsibility lies with the installer;
•
It is recommended to wear protective gloves during installation to avoid injury from cuts;
•
The warranty does not cover damage caused by incorrect installation;
•
In case of incorrect installation, tampering with the appliance, or non-compliant connection, the
product warranty becomes invalid;
•
After installation, the power cord must not come into contact with moving parts of kitchen compo-
nents (e.g., a drawer) and must not be subjected to mechanical stress;
•
This product requires constant ventilation during use. Do not cover the air vents;
•
Upon completion of the installation, the technician must ensure that the product has been installed
correctly.
4