Disposal; Use And Control Before Use / Control Panel / Starting The Appliance / Temperature Control - JUNO Electrolux JRG 90880 Gebrauchsanweisung

Notes which are important for your safety or for the proper functioning of the appliance
Supplementary information regarding operation and practical applications of the appliance.
Tips and notes concerning economical and environmentally sound use of the appliance

Disposal

Appliance Packaging Information
¥ The materials used on this appliance marked with the symbol
>PE<=polyethylene
Disposal of old Appliances
Information concerning collection schedules or locations can be obtained from your local Council or
Environmental Health Office.
At the end of the Appliance Life
¥ When disposing of your appliance use an authorised disposal site.
The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you purchased
the product.
¥ Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped
inside.
Use and Control
Before Use
Wait two hours before connecting the
appliance to allow the oil to flow back in the
compressor.
¥ Before using the appliance for the first time, wash
the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abrasive
powders, as these will damage the finish.
¥ Remove safety elements used for transportation.
Control panel
1 Light switch
2 Temperature regulator and ON/OFF switch
10
Instructions for the use of the instructions booklet
>PS<=polystyrene >PP<=polypropylene - All materials are environmentally sound!
are recyclable.
Starting the appliance
¥ The temperature regulator is located at the top of
the appliance on the control panel. It is also the
ON/OFF switch.
¥ A coin is required to turn the temperature regulator.
¥ Insert the plug into the wall socket and turn the
thermostat knob clockwise beyond position ÇOÈ
(OFF).
¥ The interior lighting comes on. The compressor
starts and then runs automatically. To switch off the
appliance, turn the temperature regulator to
position ÇOÈ.
Temperature Control
¥ The temperature regulator allows you to adjust the
temperature inside the refrigerator according to use
and external conditions.
¥ The following effects are of significance in respect
of the interior temperature:
¥ Ambient temperature
¥ Quantity and temperature of the food stored;
¥ Frequency with which the door is opened and
how long it is left open
¥ the location of the appliance.