Renkforce RF-HC-550 Bedienungsanleitung Seite 4

Operating Instructions
48 Megapixel wildlife camera
Item No. 2300581
Operating Instructions for download
Use the link www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
Intended use
This product is intended for capturing digital photo and video recordings for home security,
warehouse surveillance, and monitoring of wild animals. It features a camouflage colour scheme
and easy to install design for convenient recording of photos or long-duration videos. The
camera also has a motion-triggered infrared night vision sensor, which is ideal for surveillance
of your house, office, construction site or warehouse, as well as animal observations.
The product can be operated via batteries or a suitable 6 V/DC power adaptor.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described, the product may be damaged. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
USB4 , USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
® ® ®
Delivery content
• Wildlife camera
• USB-C cable
®
• Strap
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases,
steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- Is visibly damaged,
- Is no longer working properly,
- Has been stored for extended periods in poor ambient conditions, or
- Has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of the
appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
(alternatively scan the QR code) to download the
• Mounting materials
• Operating instructions
Caution:
• To avoid damaging the components, do not attempt to open or repair the PCB
without professional guidance.
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Do not use or store the camera next to hot objects, air conditioner exhaust vents,
lights, etc.
b) Batteries
• This camera is powered with either 4 or 8 AA Alkaline batteries. Do not use
rechargeable AA batteries (1.2V) with this camera, as the battery voltage is not
sufficient to properly power the device. Change the batteries when the low battery
icon is displayed.
• Correct polarity must be observed while inserting the batteries.
• The batteries should be removed from the device if it is not used for a long period
of time to avoid damage through leaking. Leaking or damaged batteries might
cause acid burns when in contact with skin, therefore use suitable protective
gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying
around, as there is risk, that children or pets swallow them.
• All batteries should be replaced at the same time. Mixing old and new batteries in
the device can lead to battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge nonrechargeable batteries. There is a risk of explosion!
c) Memory card
• Insert the SD memory card correctly.
• Note: Memory cards may be ejected and inserted when the camera is switched
on.
• An SD/SDHC (up to 128GB) Class 10 or above memory card is required for this
camera.
Key features
• 13 MP CMOS sensor.
• 40 pcs IR LED flash with 65-feet coverage.
• Adjustable PIR sensitivity.
• Quick 0.2s trigger time.
• Adjustable delay between motion.
• Powered by 4 or 8 AA alkaline batteries with 6-month standby time.
• Excellent image quality during daylight, twilight, and nighttime.
• Time lapse and video modes.
• No motion blur at speeds of up to 2 feet per second
• 60-feet flash and detection range.
• Camouflage housing cover.
• Supports SD memory cards up to 128 GB.
Operating elements
Front
Right/left
BACK
Bottom