Wiring The Device - Csl R'evolve C15 N100 Bedienungsanleitung

Thank you for choosing a product from CSL Computer. With this system, you have
chosen a product that has been manufactured to the latest technical standards
and, we hope, will give you many years of pleasure. Please read the instructions in
this manual carefully.
1 Scope of delivery
• CSL R'Evolve C15 V4 Notebook
• External 30W power supply unit, 12V/2.5A
• Operating instructions
If, despite our quality control, your delivery is not complete, please contact us as
soon as possible, at the latest within 14 days.
2 Tips on how to set up your notebook correctly
Please keep this manual in a handy place near your notebook. The manual should
also be handed over to the new owner if the notebook is sold. You can download
any necessary drivers for your purchased notebook from the CSL Computer GmbH
service area.
3 Operational safety
Please contact our customer service if cables are burnt or damaged. Never
operate the appliance with a defective cable! A defective cable cannot be repaired
under any circumstances. Only use the mains adapter supplied. The power supply
unit has the following specifications: 30W (12V/2.5A).

3.1 Wiring the device

Lay the cables so that they cannot be stepped on or tripped over and do not place
any objects on the cables. Please wire your notebook when it is switched off.
Only some devices can be wired when switched on, for example USB and Firewire
(IEEE1394) devices. Please refer to the instructions for the peripheral devices.
English
19