EDIFIER K750W Kurzanleitung

Wireless Stereo Headset with Microphone
EN 1. Power ON/OFF
Press and hold the MFB to power on/off.
2. First pairing
1. Once powered on, the headphones will automatically enter
Bluetooth pairing mode.
2. Select "EDIFIER K750W" from your device list to connect.
3. Pairing for new device
1. In OFF state, press and hold the MFB for 6s to enter Bluetooth
pairing mode.
2. Select "EDIFIER K750W" from your device list to connect.
Note: For subsequent use, the headphones will automatically
connect to the device used last time.
4. Multipoint connection
①
②
③
1. Pair device A with the headphones successfully.
2. In OFF state, press and hold the MFB for 6s to enter Bluetooth
pairing mode, then select "EDIFIER K750W" in device B settings
to connect.
3. Select "EDIFIER K750W" again in device A settings to connect,
and the multipoint connection is done.
Note: For subsequent use, the headphones will automatically
reconnect to the two devices used last time.
5. Controls
Call
●
x1
x1
x2
Note:
1. "x 1" Press, "x 2" Double press, "—" Press and hold;
2. Default sound mode: Sidetone mode
3. Download EDIFIER ConneX App to customize more control settings.
6. Reset
1. ln ON state, press the "+" and "-" buttons simultaneously for about
5 seconds to finish reset.
2. The headphones will automatically enter Bluetooth pairing mode
if successful.
7. Charging
Connect the headphones to a power source via the USB-C cable for
charging.
Note:
1. Make sure the USB-C port is completely dry before charging.
2. The headphones are powered off during charging.
K750W
Manual
1s -
1s -
Bluetooth
EDIFIER K750W
A
Music
●
x1
x1
x1
5s
ON
OFF
Bluetooth
EDIFIER K750W
6s
Bluetooth
EDIFIER K750W
Bluetooth
EDIFIER K750W
A
6s
Multi-function button
B
Mode
●
x2
x6