Before The First Use; Useful Tips In Case Of Malfunctions - Fritel Rg 2170 Gebrauchsanweisung

• ALWAYS place the appliance on a heat proof, solid and flat base, such as a kitchen counter or table, so that the
appliance won't move or turn over.
• After use remove the plug from the power point. Also proceed this way when the appliance is not in use, before cleaning
and moving.
• The appliance may also be used outdoor, on the following conditions:
* The power cord should regularly be examined for signs of damage. If this is the case, do not use the appliance
anymore, but immediately return it to your sales point.
* The appliance must be connected to a socket-outlet having an earthed contact 230V.
* The appliance must be supplied through a residual current device (RCD) having a rated residual operating current not
exceeding 30 mA.
• NEVER use extension cords or sockets. Place the appliance near a power point and connect it directly. ALWAYS
complete unroll the power cord.
• NEVER let the cord hang over the edge of the table or the counter.
• NEVER place the power supply cord near heat sources such as cookers, heatings or ovens.
• NEVER place the appliance near curtains, wall decoration, clothing, towels or other inflammable objects.
• NEVER use accessories from other appliances.
• Only use the appliance on the mains voltage as indicated on the identification label.
• This appliance is only suited for indoor household use, and not for professional use.

2. BEFORE THE FIRST USE

• Check if the mains voltage of your appliance (230 Volt) corresponds with the mains voltage in your home.
• Remove all packaging and stickers.
• Turn on the appliance ad let it heat up for about 10 minutes. Turn off the appliance again, pull the cord from the socket.
• Let the appliance cool down completely.
• Remove the plate and the pans from the appliance. Clean the plate and the pans as described under 'Cleaning' before
the first use.
• Put the plate back into the appliance.
• The appliance is now ready for use.
• ATTENTION: Upon the first use, there might be a slight smell or smoke output. This is normal.
3. START TO GRILL
• Completely unroll the power cord, and plug in the appliance in a 230 V socket.
• Turn the appliance on by means of the On – Off switch. When the appliance is turned on, the switch illuminates.
• ATTENTION: the appliance will now get hot.
• ATTENTION: do not use frozen food! If you use defrosted food, make sure to pat the excess fluid with a paper towel,
otherwise you will not get a perfect result.
• Put the chosen food on the grill plate or in the pans and put them under the grill.
• Do not use sharp utensils to turn or (re)move the food as they could damage the non-stick coating of the plate or pans.
• After use pull out the plug and switch off the appliance.
• Let the appliance cool off entirely before moving it, removing the baking plate or cleaning it.
4. CLEANING
• Pull the plug from the socket.
• Let the appliance cool off entirely before removing the plate.
• The grill plate and the pans are dishwasher proof. But if you choose to clean them by hand with hot water and
detergent, make sure NEVER to use stiff washing-up brushes, only a soft cloth!
• The base of the appliance can be cleaned with a damp cloth. NEVER IMMERSE these parts in water or in any other
liquid.

5. USEFUL TIPS IN CASE OF MALFUNCTIONS

12