② Hub Button
Factory Reset: Press and hold for 5 seconds.
Initiate Sub-device Pairing: Double-click the button.
③ Ethernet Port Upon Ethernet connection, the device seamlessly prioritizes
Ethernet for enhanced connectivity.
*Prior to connecting to Ethernet for increased stability, it is recommended to
first configure the device for Wi-Fi through the app's guided process and
complete the pairing procedure.
FAQs
At Meross, we strive to assure your satisfaction. Attached below is a
non-exhaustive list of questions that users are mostly concerned about.
1. What are the two buttons on the top of the device used for, and how can
they be configured?
These buttons are designed for linking with other Meross smart home
products. For example, you can set it up so that when you press the left
button, a specific Meross smart light bulb in the bedroom turns off. You can
configure this in the Meross app. For detailed instructions, please visit:
https://www.meross.com/en-gc/FAQ/593.html
2. How do I activate the backlight?
The backlight of the device is activated through vibration. When the light
level is ≤ 4LV (modifiable via the Meross app -> device settings -> backlight
settings), you can activate it by lightly tapping the device or the surface it's
placed on, such as a desk.
3. Will the device still function properly if the network is down or it's
disconnected from the Hub?
5