Tips
• The device is intended primarily for machine-spun laundry! If hand-washed or non- machine-spun
laundry is to be ironed, first allow it to dry out a little first.
• The drying / ironing process takes around 10 minutes for a spun-dried shirt. However, the length of
time can vary depending on the material and thickness of the material. We recommend that you start
with a shorter time and extend it if necessary.
• The nylon balloon can be enlarged or reduced in size with the aid of the zip fasteners. For smaller
sizes, the zip fasteners should be closed. For larger sizes, the zip fasteners should be opened on both
sides.
• Wide-apart buttons may result in the button strip crimping slightly during ironing. Here it is advisable
to smooth down the button strip again by hand immediately after the pressing process.
Cleaning and storage:
Caution
• Pull the main plug out of the plug socket and allow the device
to cool down completely before doing any cleaning!
• Never immerse the device, the main cable or the main plug
in water or other liquids!
• Do not use any corrosive or abrasive cleaning agents or
cleaning pads to clean the device. These can damage the
surface.
• Cleaning and maintenance operations must be carried out
with the appliance disconnected from the power outlet.
• The machine must be completely cooled down before it is
stored or cleaned.
• Clean the machine and its accessories with a slightly damp
cloth. Never use a cleaning product or detergents.
Steps
1. Clean the device and the nylon balloon if necessary, with a
slightly damp cloth and a little mild detergent if required.
Then wipe down fully with a dry cloth.
2. Allow all parts to dry completely before you put them
away.