Control Panel
1: Temperature Indicator Light: RT means room temperature. Other temperatures can be set to 30, 40,
50, 60 or 70 Celsius degree.
2: Timer Indicator Light: You can set the operating time to 15, 30, 60, 90, 130 or 180 minutes. It will be
automatically count down based on your set time.
3: Minus Icon: Adjustment for Temperature Decrease.
4: Plus, Icon: Adjustment for Temperature Increase.
5: Power Switch: On/Off.
6: Minus Icon: Adjustment for Timer Decrease.
7: Plus, Icon: Adjustment for Timer Increase.
Operation Notes:
Caution: Danger of suffocation from plastic films and bags! Keep children and animals away from the
packaging material.
Unpack the items supplied and check them for completeness (see the "Items Supplied and Device
Overview" chapter) and possible transport damage. If the device, the main plug or the main cable does
have damage, do not use the device, but contact our customer service department.
Before using the device, remove all packaging material and any label that may be on the device and are
used for protection during transportation or for advertising.
Assembly
1. Plug the telescopic rod (3) into the recess on the top of the motor unit (7).
2. Follow the instruction manual to fix the left and right hangers (2) into the collar section (1), then
place it onto the telescopic rod (3) tightly.
3. Attach the balloon:
Pull the balloon from the top of telescopic rod (3) to the bottom and fit the elastic cord on the bottom
onto the mounting flange (6).
The device is disassembled in the reverse order.
Use:
Caution
• Only place the device on a stable, flat, moisture-resistant and heat-resistant surface.