Aquaglide ROCKIT JR Bedienungsanleitung Seite 7

Chart 1 – Working Pressure by Chamber - Rockit Jr.
Valve [Inflate Order]
MAIN [1]
PERIMETER [2]
SADDLE [3]
1. Locate a flat, dry area with access to outlet for electrical pump. The best setup position will also make
launching easy. Never drag product as damage may occur.
2. Unfold product completely and locate Main Valve [1]. To help future storage, closely note original folding &
packaging method. Remove valve cap and confirm valve is in inflate (1-way airflow) position.
3. Insert air pump hose with proper valve fitting into Main Valve [1], lock into place. Use pump to inflate Main
Valve [1] to Working Pressure as shown in Chart 1.
4. Repeat step 3 instructions to inflate each chamber to proper Working Pressure shown in Chart 1 until all
chambers are properly inflated.
5. Confirm that suitable anchor(s) and mooring lines are in place before launching this item (see Anchoring).
6. To launch product, lift completely and place in water. Large items may require many extra people to
accomplish this. Never drag product as damage may occur.
7. Rockit Jr. is a Rocking Feature intended for use without other items connected. This item has no
connecting rings and should never be connected to any other items.
7
Working Pressure in psi (Bar)
0.75 psi (0,052 bar)
2.0 psi (0,138 bar)
1.9 psi (0,131 bar)
www.aquaglide.com