insta360 Link Benutzerhandbuch Seite 7

Firmware Updates
Method 1:
If there's a new firmware version available and you've installed and opened the Link
Controller software, you'll be prompted to update as soon as connecting to Insta360
Link. You can go to the More Settings page and follow the onscreen instructions to finish
the firmware update.
Method 2:
Use the included USB cable to connect Insta360 Link to your computer.
•
Tap the Touch Key three times and check that the white light flashes. Then, press
•
and hold the Touch Key for 5 seconds. Once the white light is continuously
illuminated, the camera will have entered update mode.
Download the firmware update file here
•
https://www.insta360.com/download/insta360-link from Insta360's official
website. Copy the file to the Insta360 Link hard drive named "INSTA360".
Repeat step 2 and let Insta360 Link reboot. The blue light will flash slowly when
•
the firmware is being updated.
After successfully updating, Insta360 Link will return to its standard mode with
•
the blue light illuminated.
Note: Do not disconnect the USB connection during the firmware update.
Indicator Status
Device Status
Standby
Streaming
Tracking mode
Whiteboard mode
Gesture successfully recognized
Gesture not available
Update mode
Firmware update
Malfunction
Privacy mode
Indicator Status
Blue
Green
Green (lower brightness)
Yellow
Flashing blue
Flashing orange
White
Slow flashing blue
Red
Off
7