insta360 Link Benutzerhandbuch Seite 4

Setting up Insta360 Link
Placement
Insta360 Link can be deployed in a number of ways, with its built-in clip design allowing
it to be clipped directly onto a computer screen (as shown below) or placed on a flat
surface. The base has a 1/4" screw hole for use with a stand/tripod.
Connecting to Insta360 Link
Important:
To avoid issues due to insufficient power supply, please connect Link directly to a
•
computer or to a USB hub with an independent power supply.
To avoid compatibility issues, please use the included USB cable to connect
•
Insta360 Link to your computer.
Insta360 Link is compatible with both Windows and macOS. Please use the USB cable to
connect it to your computer's USB port. Once connected, the blue light on the camera
will flash. When it is fully powered on, the blue light will be continuously illuminated. It
will automatically power off when unplugged.
Installing Link Controller
As soon as you connect Insta360 Link to your computer with the USB cable, you can use
it immediately. However, to adjust more settings, please visit
https://www.insta360.com/download/insta360-link to install the free Link Controller
software.
4