Gestures
Note: When performing gestures, please be careful not to cover your face with your
hands.
Overhead Mode
When connected to a suitable accessory, Insta360 Link can be
set to Overhead Mode. In this mode, Insta360 Link's lens will
automatically face downwards, giving you a top-down view.
You can also manually adjust the angle. You can activate this
mode via Link Controller.
DeskView Mode
DeskView can be enabled in Link Controller. Once enabled,
Insta360 Link will automatically adjust its lens to a 45° angle to
give a clear and levelled overhead view of your desk. To ensure
a clear view, ensure Insta360 Link is not mounted at an over
100° angle in relation to your desk.
Enter / Exit Tracking Mode
When your face is in the frame, make this gesture until the
camera's blue light flashes rapidly, and the camera will switch
the AI tracking function on or off.
Adjust Zoom
When your face is in the frame, make this gesture near your
face until the camera's blue light flashes rapidly, at which point
the zoom function is activated. To zoom in, move your hand a
short distance upwards and hold it until the desired zoom is
achieved. To zoom out, move your hand a short distance
downwards and hold it. The lens will zoom until no gesture is
detected or it has zoomed out completely.
Enter / Exit Whiteboard Mode
Fix the whiteboard recognition markers to the four corners of
the whiteboard. When a recognition marker is detected in the
frame, make this gesture until the camera's blue light flashes
rapidly and the camera will enter or exit Whiteboard Mode.
6