Trust START LINE SET AGDR2-3500R Bedienungsanleitung Seite 6
Vorschau ausblenden
Andere Handbücher für START LINE SET AGDR2-3500R:
- Bedienungsanleitung (54 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AGDR2-3500R
SET WIRELESS
1. Connect lamp/device
Check if the lamp or device is turned on. Then, plug the lamp or device into the receiver and plug the
receiver
into an outdoor
2. Activate
learn-mode
Press the learn-button
for 1 second.
will blink slowly.
3. Assign Trust SmartHome
While the learn-mode
is active, send an ON-signal with any Trust SmartHome
code to the receiver's memory.
4. Code
received
confirmation
The receiver
will switch
on/off
up to 6 different
transmitter
receiver to another socket or in case of power failure.
5. Manual operation
with a Trust SmartHome
. Press
ON to switch
the
Press
OFF to switch
the receiver
2.
6. Single code delete
Press the learn-button
during which the CED-indicator will blink slowly.
2.
While the learn-mode
delete
that
code.
3.
The receiver
will switch
SWITCHING
and place receiver
socket.
Do not exceed
the maximum
The learn-mode
transmitter
code
2 times
to confirm
codes in its memory. The memory will be preserved when moving the
receiver
on.
Off.
for 1 second. The learn-mode
is active, send an OFF-signal of a specific Trust SmartHome
on/off
2 times
to confirm
load: 3500
W
will be active
for 15 seconds
the code has been
received.
transmitter
will be active for 15 seconds,
code deletion.
and the LED-indicator
transmitter
to assign the
The receiver
can store
transmitter
to
Werbung
