Get Started; Care And Cleaning - Rusta 907512220101 Gebrauchsanweisung

GET STARTED!

Remove all protective packaging before you start using the product.
USE
USE WITH ADAPTER
1. Connect the USB-A plug into the adapter.
2. Place the fan on a stable surface.
3. Connect the adapter into a grounded wall socket.
4. Adjust the wind direction by tilting the fan. Fan head can be tilted 360 degrees.
5. Start the fan by pressing the power switch to the right or left position.
II – High fan speed
I – Low fan speed
USE WITH USB CABLE
1. Place the fan on a stable surface.
2. Connect the USB-A plug into your computer's USB-A input.
3. Adjust the wind direction by tilting the fan. Fan head can be tilted 360 degrees.
4. Start the fan by pressing the power switch to the right or left position.
II – High fan speed
I – Low fan speed

CARE AND CLEANING

• Before cleaning or storing the fan, it must be switched off and unplugged.
• To ensure adequate air circulation to the motor, keep the vents at the rear of
the motor free of dust. Do not disassemble the fan to remove dust.
• Wipe the exterior parts with a soft cloth soaked in a mild detergent.
• Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline or thinner.
• Do not allow water or any other liquid into the motor housing, interior parts
or USB cable.
• When storing your fan, make sure to place it in a dry environment. To reduce dust
and particle exposure, it is best to cover your fan – especially in the off-season period.
Coil the USB cable loosely. Do not kink or pull the cable tight.
7