Setting The Comfort Functions - STIEBEL ELTRON FFB 1 SL Electronic Comfort Bedienungs Und Installationsanleitung Handbuch

4. Setting the comfort functions

START
Press for 2 seconds
Energy and water saving
Child safety control
Water quantity automatic control
Second display
Flow rate
Setting the clock
Press for 2 seconds
End
16
for the user and the qualified installer
Set the max. flow rate value, e.g. 8.0 l/min.
4 - 15 l/min
20 - 60 °C
Set the max. value to limit temperature, e.g. 36 °C for a baby's bath.
5 - 200 l Set the max. value for water quantity, e.g. 80 l.
Note:
The water quantity automatic control must be operated before filling the bath. Operation
applies for one filling of the bath only.
Energy consumption
N:K
Note:
In the "kWh" and "m3" menus, the meters can be reset to ZERO by pressing and holding
down
Set the clock
00:00 ... 23:59
Remark:
Re-set after a power cut affecting the DHE..SL (i)
Ö at any point
Ö Automatically 10 seconds after the last setting
Note:
3UHVV
Water quantity
and together.
XQG IRU  VHFRQGV j UHWXUQ WR IDFWRU\ VHWWLQJV
Time