Menu Guide; At A Glance; Setting The Temperature; Warning Displays - STIEBEL ELTRON FFB 1 SL Electronic Comfort Bedienungs Und Installationsanleitung Handbuch

3. Menu guide

for the user and qualified installer

3.1 At a glance

Temperature display
Bar display to indicate power
Second display
e.g. flow quantity
Temperature memory buttons
M1 and M2
Menu button
Child safety control
Wellness programme
Temperature selection (set values)

3.2 Setting the temperature

Stepless adjustable temperature selection
20 to 60 °C
z
Ö
OFF
z
Temperature memory push-buttons
For rapid switching between two pre-selected temperatures
Press for 2 seconds to save the required temperature:
z
Temperature display flashes once and is saved.
Select stored temperature
z

3.3 Warning displays

HOHFWURQLF FRPIRUW

3.4 ECO function

(&2
(&2
14
Heating is switched off
Flashing warning light for excess temperature
When the inlet temperature is higher than the desired temperature, e.g. as a result of solar-heated water, the tem-
perature display flashes and the second display shows the inlet temperature.
Temperature display flashes
Second display – inlet temperature
On/Off
ECO function for water and energy saving
The quantity of water flowing through is limited to a maximum value (factory setting 8 l/min, a diffe-
rent value can be set in the menu).
Ö
ECO on
Ö
ECO off
Battery change recommended
Error display (see service mod
on the water heater)
Backlighting
Display symbols:
- ECO
-Healthy showering
- Water quantity automatic control
- Child safety control
ECO water and energy saver
Water quantity automatic control
Symbol in the display
Symbol disappears