Autool ATF702 Benutzerhandbuch Seite 11

Transmission oil pipe on vehicle
Connect one end of the transparent connecting pipe to the external oil
●
inlet on the side of the machine and the other end into the cleaning fluid.
●
Turn the left valve to the "Exchanging" position, and the right valve to the
"Extracting" position.
Turn on the power switch; at this point, the cleaning fluid will be drawn into
●
the transmission.
●
Once the cleaning fluid has been fully injected, remove the transparent
short tube and turn off the power switch. Turn the left valve to the "Clean"
position and the right valve to the "Exchanging" position.
Start the car's engine (the equipment's power does not need to be turned
●
on during cleaning). The machine is now in a Cycle Cleaning state, and
Radiator
9
Auto
Transmission