How To Charge Power Station; How To Charge Battery - Renogy Rpp200Sb-Se Benutzerhandbuch

How to charge power station

•
Place a solar panel under direct sunlight. Steer clear of objects that can shade the solar panel
and slow down the charging process.
•
Connect the solar connectors of the solar panel with the solar charge cable (sold seperatly),
then Connect DC input port of power station.
•
The solar charge time is highly dependent on the solar irradiance and the ambient tempera-
ture.
•
The operating voltage of the solar panel shall exceed the minimum DC-input voltage of power
station, and the open circuit voltage shall NOT exceed the maximum DC-input voltage of power
station.

How to charge battery

•
Connect solar panel connector to PV Terminals of charge controller (sold seperately)
•
Connect the BATT Terminals of charge controller to battery terminals using tray cables (sold
seperately)
•
Set the charging paremeter on charge controller, and the panel is ready to charge battery.
Operation
- 06 -