Nvidia QUADRO RTX NVLINK BRIDGE Schnellstartanleitung Seite 4

Instructions
Install the first Quadro RTX graphics card into the
primary PCI Express x 16 slot on the motherboard.
Install the second Quadro RTX graphics card into
the adjacent PCI Express x 16 slot.
Connect your NVLink Bridge into the labeled
NVLink ports on the two graphics cards.
Note: To check the status of your
NVLink for each of the two GPUs, use the
following
nvidia-smi
nvidia-smi
If configured
be the same
Link 0: active
Link 1: active
commands:
nvlink -i 0 -s
nvlink -i 1 -s
correctly, the output should
for both GPUs: