Honda HP500H Bedienungsanleitung Seite 43

Adjusting the track tautness
If the tracks are not properly taut, they may slip off the wheels or their
service life may be markedly reduced.
Inspection
When a force <about 98 N (10 kgf, 22 lbf)> is applied to the middle of
the tracks, check that the slackness is between:
8.0–12.0 mm (0.31–0.47 in)
8.0–12.0 mm
(0.31–0.47 in)
Track adjustment
1.Tip up the carrier.
Loosen the two lock nuts until there is space between the nuts and
the frame.
2.Tighten the inner lock nut by hand until clearance between the lock
nut and frame is:
5.0–10.0 mm (0.20–0.39 in)
3.Hold the inner lock nut and tighten the other lock nut against it
securely.
NOTE:
Use the two 19 mm wrenches furnished with the power carrier as
illustrated.
5.0–10.0 mm
(0.20–0.39 in)
40
98 N (10 kgf, 22 lbs)
TRACK
TRACK TENSION SPRING
LOCK NUTS (2)
FRAME SURFACE
WRENCHES 19