ADEO SCREEN RUGBY-PLUS Bedienungs- Und Installationsanleitung Seite 7

ENGLISH – Rolling screen installation and operation manual
PROGRAMMING END STOPS MOTOR SOMFY RTS 230V 50Hz/120V 60Hz (procedures already carried out in factory, SHOULD NOT be performed by unauthorised personnel)
Move the
screen surface
to down limit
switch.
1.
Move the
screen surface
to up limit
switch.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: RUGBY-PLUS Installation Manual rev4 | 25.02.2025
Please verify that you are working with the latest revision of this document before specifying your screen.
10 END STOP SOMFY MOTOR ADJUSTMENT SOMFY
A – Left Motor
PRESS WHITE
BUTTON
PRESS YELLOW
BUTTON
1 Press both
and
same time until you will see
a brief up and down motion
of screen surface.
Press both
and
same time until you will see
a brief up and down motion
of screen surface.
Down limit switch
2
Move the screen with
at the
to reach the desired
down limit position.
Up limit swicht
2
Move the screen with
at the
to reach the desired up
limit position.
B – Right Motor (standard)
PRESS YELLOW
BUTTON
PRESS WHITE
BUTTON
3
4
buttons
Press button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
3
4
buttons
Press button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
Page 7