TRENDnet TI-PG1284i Schnellinstallationsanleitung Seite 11

Section B: Configuring the switch for local network management
1. Connect an Ethernet/network cable to your computer and one of the switch ports.
Computer
2. Assign a Static IP address to your computer's network adapter in the subnet of 192.168.10.x
(e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.
3. Open your web browser, type the IP address of the switch in the address bar, and then press
Enter. The default IP address is 192.168.10.200 / 255.255.255.0.
4. Click Next on the Switch Setup Wizard.
Note: If the switch setup wizard does not appear, you can click the setup wizard button
the top right section of the switch management page to access the switch setup wizard.
9
Network
in