VEVOR RB-0200 Benutzerhandbuch Seite 5

USE
1. After getting the product, unroll the rain barrel (Zipper/filter hole side is the
top). Keeping the outlet valve closed, fill in the liquid from the top.
2. Install 6 supporting foot strips and start to use.
MAINTAIN AND STORAGE
1. Please use mild detergent and water for cleaning.
2. Don't scrub with hard objects like brushes.
3. Dry before storage. Do not store it in a dark, damp place.
4. Clean the debris at the filter port in time to avoid clogging.
5. If the barrel body is damaged, it can be repaired with the attached patch (Please
bring your own glue).
6. If the joint is leaking, tighten the joint or wrap the waterproof tape(Provide
for yourself) on the thread of the joint before installing it(As shown below).
Note: If you install and remove the connector yourself and the switch is not vertical,
try increasing the number of winding laps of waterproof tape.
4