Homend ROYALTEA PLUS 2 IN 1 Benutzerhandbuch Seite 32

Please note:
If you want to change or cancel your
selection after selecting a mode, press the
mode selection button ''
appears on the display.
Please note:
Even though your machine brings the water
temperature to 40 °C, we recommend you to be
careful and check the water
temperature before preparing the baby formula.
Please note:
Your tea maker has a dual safety system; it
activates when it runs out of water and
overheats and automatically switches off your
tea maker.
Note: Do not press the Turkish Coffee
brewing button while the kettle is in the
container.
80 °C herbal tea preparation:
80°C is the ideal temperature for preparing
herbal tea. Press the mode selection button
'' '' on the far left for 2 times,
"80°C" temperature degree on the panel will
start to flash. After 4 seconds after you
release the button ''
flashing and the mode selection button starts
flashing. This indicates that your water
continues to be heated and the selected target
temperature is being reached.
When the temperature target is reached, the
light will remain on steadily. When the period
of keeping warm is completed, the light will go
out.
3 0
'' until ''OFF''
" 80°C light stops
When the water temperature reaches 40 °C,
your tea maker will notify you by saying "your
water is ready, good appetite ".
Please note:
Thanks to the keeping warm feature, when
your water reaches to 80°C, it will be active
for 30 minutes.
After 30 minutes, your machine will switch
itself off. After the water in the kettle is
heated, the machine will switch off
automatically. The keeping warm mode will be
deactivated automatically.
Please note:
If you want to change or cancel your
selection after selecting a mode, you should
press the mode selection button ''
once. Then ''OFF'' will appear on the display.
Note: Do not press the Turkish Coffee
preparation button while the kettle is in the
container.
100°C water boiling:
When you press the button ''
left, 100°C will start flashing on the panel.
4 seconds after you release the button, the
100 light will stop flashing and the mode
selection button will start to flash.
This indicates that your water continues to be
heated and the selected target
temperature is being reached. When the
temperature target is reached, the light will
stay on steadily and when the period of
keeping warm is completed, the light will go
out.
'' for
'' on the far
R O Y A L T E A P L U S