H O W TO U S E YO U R
T E A M A K E R ?
Your Royaltea automatic tea maker consists of
three parts: pot, kettle and water container.
There are 3 touch buttons on the touch panel of
your automatic tea maker: mode selection but-
ton, automatic tea brewing button and Turkish
coffee preparation button.
Fill the water container at the back of the
product with water not exceeding the "MAX"
limit. For automatic tea brewing, fill the water
container at the back of the product with water
not exceeding the "MAX" limit.
Please note:
Pay attention to fill water into your tea maker
between the "Minimum" and "Maximum" levels.
Please note:
When you plug in your tea maker, all the
buttons on the touch panel will light up.
And you will see "OFF" appearing on the
display. If you wait 30 seconds without
doing anything, the light of the touch panel
will go out.
Simply touch the display to activate the
functions.
Mode selection button:
The icon shown on the far left with "
the mode selection button. You can adjust
the temperature of your water with 3
different temperature options, namely 40°,
80° and 100° with this button.
U S E R ' S M A N U A L
K U L L A N I M K I L A V U Z U
The mode on the display will change each
time you press the button and you can mon-
itor the instant temperature on the panel.
Preparation of 40 °C baby formula water:
40°C is ideal temperature for preparing
baby formula water. Press the mode se-
lection button ''
times, "40°C" temperature degree on the
panel will start to flash. After 4 seconds after
you release the button, "40°C" light
stops flashing and the mode selection
button
starts flashing. This means
that your water continues to be heated and
the selected target temperature is being
reached. When the target temperature is
reached, the light will remain on steadi-
ly. When the period of keeping warm is
completed, the light will go out. When the
water temperature reaches 40 °C, your tea
maker will notify you by saying "your water
is ready, good appetite for your baby".
Please note:
Thanks to the keeping warm feature, it will
be active for 30 minutes after your baby
formula water reaches 40°C. After 30
" is
minutes, your machine will turn itself off.
The machine will be switched off
automatically after taking the water from the
kettle. Keeping warm mode will be
deactivated automatically.
'' on the far left for 3
2 9
0 3