Timago TGR-R RA 885 Benutzerhandbuch Seite 27

the return to ac�vity of the people with locomo�on and �l�ng to erect
posi�on problems. It guarantees beter stabiliza�on, support and
security while walking.
3. Assembly
Unfolding and folding the rollator
• To unfold the rollator, pull the frame apart and press the seat un�l
the rollator is completely unfolded.
• Rear wheels and push handles are joined by the brake cables, thus
firstly, fix handles into the moun�ng openings and blocked them
with fixing knobs. Then, block the rear wheels with pins.
• Fix front wheels in the front part of the frame and secure them with
locking clips which are placed in the above height adjustment
openings.
• Fix backrest in the upper part of the frame and block it with locking
clips.
• Remove plas�c casing from wheels.
• To fold the rollator, li� up the seat and the bar which is placed under
the seat.
NOTE! Be careful while folding or dismantling the rollator due to the risk
of smashing fingers in hinges.
Brakes func�on
• To stop the rollator, pull the brake handle upwards and hold.
• While stop or using the seat, lock the brake by pushing down the
brake handle.
• To release the brake, pull the brake handle upwards.
Height adjustment of handles
• To adjust the height of the handles, unscrew the locking knob which
is located on the outer side of the frame, select appropriate height
and �ghten the locking knob.
Note! The handles must be set on the same level.
Height adjustment of seat
27