Werbung
2.2 Charging Display Instructions
Battery Indicator
3. Input/Output Instructions
No
Functional Description
1
USB - C charge and discharge port
3
USB - A discharge port
Operation Process Instructions
1. How to power up Lokithor
Short press on the "LED light button
2. Using the Jump-Start Function
2.1 Method One: 12V Auto Start
2.1.1 Ensure that the vehicle's electrical and starting system is a 12VDC system.
2.1.2 Connect the positive and negative clamps to the corresponding terminals on the vehicle battery,
ensuring a secure connection.
2.1.3 To activate Lokithor, short press the "Power button
initiate a 10-second countdown while it is verifying the clamp to terminal connection is good and
correct. After the countdown, if the start indicator on the display panel flashes and shows the vehicle's
actual voltage, the vehicle is ready to start.
2.1.4 If the vehicle starts successfully, short press the power button to exit the starting function, and
then disconnect the battery clamps.
2.3 Discharge Display Instructions
Power
Battery Indicator Power
Discharge indication
When the product is discharged via USB, the
screen displays the discharge power rate and the
discharge symbol '－'.
4
3
" OR "Power button
1 2
No
Functional Description
2
DC 5521 charge port
4
DC 5525 discharge port
"
"or the "LED light button
". It will
Werbung
