Clear Dtc; I/M Status - Strex Obd2 Bedienungsanleitung

Clear DTC

Before clearing the fault code, please follow the prompts of the fault code to carry out vehicle
maintenance, vehicle maintenance can be completed to clear the fault code operation.
Select [Clear DTC] and press the [OK] button to continue, the display will show as follows:
Figure 3
NOTE:
Clearing a fault code does not mean that the fault code in the ECU has been
eliminated; the fault code will continue to appear as long as the vehicle has a
fault.

I/M Status

The [I/M Status] function is used to check the operation of the emissions system on OBD II-
compliant vehicles and is an excellent feature for checking vehicle compliance with national
emissions testing. The I/M status can be selected from Clear Fault Ready or Current Cycle Ready.
The I/M shortcut can also be used for one-touch access.
Select [I/M Status] and press the [OK] button to continue, the display will be as follows:
Figure 5
40
Figure 4
Figure 6