DeLOCK 64324 Bedienungsanleitung Seite 3

English
Installation
Default mode
Connect the source to the emulator first, then connect the display. You can use
the default EDID provided by the emulator, which supports up to HDMI 2.0.
Smart mode
Without learning the EDID, connect the emulator to the display first, then connect
the source. This will simulate the EDID of the backend display.
Back up mode
After connecting the source and the display to the emulator, press the learning
button. The LED light will flash and then stay on, indicating that the EDID of the
backend display has been learned.
Restore default EDID
Connect the emulator to the source without connecting the display. The LED light
will flash and then stay off, indicating that the default EDID has been restored.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 11/2024
-3-