Mains Connection - Renkforce MP5000 Bedienungsanleitung

c) Mains Connection
The power amplifier and all connected devices must be switched off.
The mains socket to which the power amplifier is connected must be easily accessible to quik-
kly separate the device from the mains voltage in case of an error.
Be careful when handling mains cables and mains connections. Mains voltage may cause po-
tentially fatal electrical shock.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Ensure before plugging in the mains plug that the device voltage indicated at the power am-
plifier corresponds to the available mains voltage. Do not connect the device if the indication
does not correspond to the available mains voltage. Wrong supply voltage will cause serious
damage.
If an extension line is used, ensure that it is designed for the respective load.
• Connect the mains cable plug (8) to a proper mains socket.
• This POWER (1) mains switch switches the power amplifier on and off.
In the "I" position, the device is switched on; in the "O" position it is switched off.
28