Auto Redial; Pin Code Request; Handset Lock - LG S5100 Benutzerhandbuch

SETTINGS

Auto redial

]
On: When this function is activated, the phone will
automatically try to redial in the case of failure to
connect a call.
]
Off: Your phone will not make any attempts to
redial when the original call has not connected.
SECURITY SETTINGS

PIN code request

In this menu, you can set the phone to ask for the PIN
code of your SIM card when the phone is switched on.
If this function is activated, you'll be requested to
enter the PIN code.
1. Select PIN code request in the security settings
menu, and then press d [OK].
2. Set On/Off.
3. If you want to change the setting, you need to enter
PIN code when you switch on the phone.
70
(Menu 7.3.6)
(Menu 7.4.1)
4. If you enter wrong PIN code more than 3 times, the
phone will lock out. If the PIN is blocked, you will
need to key in the PUK code.
5. You can enter your PUK code up to 10 times. If you
put wrong PUK code more than 10 times, you can
not unlock your phone. You will need to contact
your service provider.

Handset lock

MENU 7.4
You can use security code to avoid unauthorized use
of the phone. Whenever you switch on the phone, the
phone will request security code if you set phone lock
to On. If you set phone lock to Automatic, your
phone will request security code only when you
change your SIM card.
Call barring
The Call barring service prevents your phone from
making or receiving certain category of calls. This
function requires the call barring password. You can
view the following submenus.
]
All outgoing calls: The barring service for all
outgoing calls.
(Menu 7.4.2)
(Menu 7.4.3)