Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DATA
Model
Rated Voltage
Rotation speed
Torque positions
Max. drill capacity steel
Max. drill capacity wood
Charger time
Battery capacity
Battery type
Max. torque
Chuck type
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
12 SERVICE DEPARTMENT
▪
Damaged switches must be replaced by our after-sales service department.
▪
If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
Copyright © 2024 VARO
POWC1071
POWC1071
20V
0-400/0-1400 min
18
10mm
20 mm
3/5 hours
1300 mAh
Li-ion
35Nm
Keyless chuck
88 dB(A)
99 dB(A)
1.3 m/s²
P a g e
| 8
-1
K = 1,5 m/s²
www.varo.com
EN
Werbung
