Battery Replacement - Elitech Rc 61/Gsp-6 Bedienungsanleitung

Battery Replacement

1 Open the battery cover, remove the old battery
2 Install a new ER14505 battery into the battery
compartment. Please note the negative cathode
is installed to the spring end
3 Close the battery cover.
What's Included
• Data Logger
• Temperature-Humidity-Combined
ER14505 Battery
A Warning
O Pleasestore your logger ot room temperature.
Pleasepull out the battery insulator strip in the bottery compartment beforeusing.
O If you use the loggerfor the
@ Do not remove the bottery if the logger is recording.
O TheLCDscreenwill be auto off ofter 35secondsof inactivity (by default). Pressthe button again to turn on the screen.
O Any parameterconfiguration on ElitechLogsoftware will delete01/loggeddota inside the logger.Pleasesave dato beforeyou apply ony new configurations.
@ To ensure the humidity accuracy, please avoid contact with unstable chemical solvents or compounds, especio//y avoid long-term storage
or exposureto the environments with high concentrations of ketene,ocetone,ethanol, isopropanol,toluene etc.
DO not use the logger for long-distance transport if the bottery icon is less than holf as
O The glycol filled bottle probe can be considered 05 a thermol buffer thot can simulate the actuo/ temperoture variations inside, which is
suitable for vaccine, medico/ or similar scenarios.
Probe •
time, pleaseuse ElitechLogsoftware to synchronizesystem time and configureporometers.
Temperature Probe
USB Cable xl
7
User Manual
•
Calibration Certificate
•
EN