Elitech RC 61/GSP-6 Bedienungsanleitung Seite 5

5. Start Logging
Press Button: Pressand hold the
Note: If the > icon keepsflashing, it means the loggerconfigured with start delay; it will stort logging after the set delaytime elapses.
6. Stop Logging
Press Button': Pressand hold the button for 5 seconds until the
Auto Stop: When the logging points reach the maximum memory, the logger will stop automatically
Use Software: Connect the logger to your computer; Open ElitechLog software, click Summary menu and Stop Logging button
Note: *Default stop is via Press Button, if set as disabled, the button stop function will be invalid;
pleose open the ElitechLog software ond click Stop Logging button to stop it.
7. Download Data
Connect the data logger to your computer via USB cable, and wait until the
ElitechLog Software: The logger will auto-upload
If data failed for auto upload, please manually click Download and then repeat above operation
8. Reuse the Logger
To reusea logger,pleasestopped it first; then connectit to your computer and use ElitechLogsoftware to saveor export the data.
Next, reconfigure the logger by repeating the operations in 4. Configure Parameters*.
After finished, follow 5. Start Logging to restart the logger for new logging
Warning! * Tomoke spacefor new loggings,01/previouslogging doto inside the logger will be deleted after re-configuration.
If you forgot to sove/export doto, please try to locate the logger in the History menu Of ElitechLog softwore.
button for 5 seconds until the icon shows on the LCD,indicating the logger starts logging
data to ElitechLog, then please click Export to select your desired file format to export
icon shows on the LCD,indicating the logger stops logging
icon shows on the LCD,then download data via:
4
EN