Elitech RC 61/GSP-6 Bedienungsanleitung Seite 4

Operation
I. Activate Logger
(1) Open the battery cover,gently press
the battery to hold it in position
(2) Pull Out the battery insulator strip
(3) Then re-install the battery cover.
2. Install Probe
Please install the probes to the corresponding jacks of T and H,
3. Install Software
Pleasedownload and install the free ElitechLog software (macOSand Windows) from ElitechUS:www.elitechustore.com/pages/download
or Elitech IJI<:www.elitechonline.co.uk/software
4. Configure Parameters
First, connect the data logger to the computer via USB cable, wait until the
ElitechLog Software:
- If you do not need to changethe default parameters (in Appendix); please click Quick Reset under Summary menu to synchronize local
time before usage;
If you need to change the parameters, please click the Parameter menu, enter your preferred values, and click the Save Parameter button
to complete the configuration
Warning! For first time user or after battery replacement:
TOavoid time Ortime zone errors,pleose make Sureyou click Quick Reset OrSave Parameter before usageto configure your local time into the logger.
Note: The parameter of Interval Shortened is disobled by default. If you set it to Enable, it will outo shorted the logging interval to once per
minute if it exceedstemperoture/hurnidity limit(s).
details are shown
or Elitech BR: www.elitechbrasil.com
3
below:
TH probe
T Probe
br.
icon shows on the LCD,then configure via:
EN