Tecnosystemi ASTRA Bedienungsanleitung Seite 38

FAn
St1
StE
CNF
UPd
rES
38
DESCRIPTION
Fan speed setting (MASTER thermostat ONLY).
With the IR communication protocol and 0/10 V output connected, the function al-
lows you to adjust the speed of the fans, regardless of the dampers / speed adjust-
ment function (see section 9.1).
Press the keys
Aut: automatic speed.
1: minimum speed
2: medium speed
3: maximum speed
Confirm with .
Ducted unit setpoint value setting in the WINTER (MASTER thermostat
ONLY).
This function allows you to set the setpoint value of the ducted unit when the HEAT-
ING mode is set.
The default value is 30°C (value transmitted via IR).
Press the keys
Confirm with .
Ducted unit setpoint value setting in the SUMMER (MASTER thermostat
ONLY).
This function allows you to set the setpoint value of the ducted unit when the
DE-HUMIDIFICATION or COOLING mode is set.
The default value is 18°C (value transmitted via IR).
Press the keys
Confirm with .
Activating WiFi configuration mode.
Activates the WiFi configuration mode of the Polaris controller.
Confirm with .
For further information, see the controller manual.
Activating the POLARIS controller update mode.
Activates the update mode of the Polaris controller.
To confirm, press and hold for 10 s
For further information, see the controller manual.
Reset thermostat.
Select . To confirm, press and hold for 10 s
RES
PEAT THE CONFIGURATION PROCEDURE.
to select the desired speed.
to select the desired setpoint value.
to select the desired setpoint value.
.
. The thermostat resets. RE-
Multi-zon Air Control System