Kruger & Matz KM0503 Bedienungsanleitung Seite 7

COMMON CONNECTION
1. Please tightening the wire
by hand in order to settle its
protruded places and avoid
short circuit.
2. Release the copper post in
counter clockwise direction,
and put the copper wire into
the hole.
3. Tightening the copper post in
clockwise direction, gently
pull the wire, and make sure
connection firmly.
Attention: the two pieces of the metal wire of the cable never be touched by each other.
NOTICE
• Never put this speaker system in the sun for long time or approach to heat.
• This speaker system will be damaged under the circumstance of highly humid or too
much dust.
• Avoid spraying the pesticide near this speaker system, or use gasoline, thinner or
other organic solvent to wipe the surface of the speaker. This results in damage or
stains the surface of the speaker.
speaker surface.
• Never try to make the input power beyond the maximum input power of the speaker
system.
• Never play such signals as audio tape's fast reverse and fast forward.
Owner's manual
MEAN
O
S S
O
Red
o
o
Black
Soft cloth should be used to clean the dust of the
O
O
Connection
terminal
corresponding
o
"+" pole of the
amplifier
Connection
o
corresponding
terminal
amplifier
to
to
pole of the
7