Trust MACC-200 Bedienungsanleitung Seite 8

EN
MACC-200 MATTER & START-LINE SMART SOCKET DIMMER
1. INSTALL THE SOCKET DIMMER
Place the socket dimmer in an outlet.
A
Connect your lighting to the socket dimmer.
B
To connect the socket dimmer with a Matter App, proceed to step 2.
To connect the socket dimmer with a Trust Switch-In Start-Line transmitter, proceed to step 3.
2. CONNECT TO MATTER APP
Make sure the phone or tablet is connected to a 2.4 Ghz WiFi network and not to a 5 Ghz WiFi network.
Open the Matter App (e.g. Apple Home or Google Home App) on your phone or tablet.
A
Short press the button on the dimmer to start Matter pairing mode. The LED indicator on the dimmer will
B
flash green. (Matter pairing mode lasts for 5 min, connect the dimmer to a Matter App within these 5 min)
Follow the instructions in the App to connect a new Matter device. Note: When connecting the dimmer to
C
the Google Home App, make sure you add the word "dimmer" or "lamp" to the name you enter when
asked for the device name. If the dimmer fails to connect, reset it according to the step "Reset Matter
dimmer"
3. PAIRING WITH START-LINE TRANSMITTER
Press the button on the dimmer shortly to start the Start-Line pairing mode. The LED indicator on the dimmer
A
will flash green. (Start-Line pairing mode lasts for 12 sec.)
During the pairing mode (within 12 seconds), send an ON signal using a Trust Switch-In transmitter.
B
The lighting will go ON-OFF-ON-OFF to confirm that pairing has been successful.
C
The dimmer can store up to 32 different transmitters in its memory. The paired transmitters are retained if the
dimmer is moved to another socket.
4. WIRELESS CONTROL OF RF433 START-LINE
Use the paired Start-Line transmitter to send an ON signal to wirelessly turn on the light.
Use the paired Start-Line transmitter to send an OFF signal to wirelessly turn off the light.
8