Weather Forecast - Explore Scientific Rpw3005 Bedienungsanleitung

button to change the figures rapidly.
5. Press [ ] button to confirm setting and enter to next
parameter.
6. The alarm will sound when the alarm setting is finished
and turned on.
7. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
TURN ON/OFF ALARM
1. Press [ ] button once to check the alarm time.
2. During the alarm time display, press [
once to turn on/off the alarm.
3. If there is no action in 5 seconds, it will turn back to
time display mode.
OPERATION
1. At the set time, alarm signal rings for 2 minutes. It
beeps faster and faster as time goes.
2 beeps per second - 0-8 seconds
3 beeps per second - 9-16 seconds
4 beeps per second - 17-24 seconds
beeps continuously - 25-120 seconds
10
2. During the alarm, press the [
delay the alarm by 8 minutes.
3. If you do not press any button to stop the alarm, it
will automatically turn off after 8 minutes.
4. To stop the alarm, press any button except
[ ].
5. The alarm will start again at the next alarm time,
unless you switch off the alarm function.
PROJECTION
] button The projector displays the time and weather
forecast on your ceiling or wall and it can rotate
180°. It is easier to view in a darkened room.
For the optimal projection results, place the unit
within 1.5 - 2 m (5-6.5 ft) from the ceiling or wall.
] button to
1. Press and hold [
backlight and projection. Press and hold again to flip
the projection by 180°.
2. If the projection is not clear, turn the wheel at the
back to adjust the focus.
3. For a continuous projection, use adapter power
source. Press and hold [
turn on/off the continuous projection.
NOTE: The projection is disabled during the RCC signal
reception.

WEATHER FORECAST

This device calculates a weather forecast for the next
12 hours on basis of the measured values. It has 5
kinds of weather forecast.
SYMBOL
] button to activate the
] button to
NOTE: Ice alert symbol [
channel 1 detects temperature between -2°C and 3°C.
TEMPERATURE
The outdoor temperature is displayed on the top right
DESCRIPTION
corner of the screen. To receive outdoor temperature
and humidity, you can connect up to 3 outdoor sensors
to the main unit. The connection will take around 8
Sunny
minutes.
EN
Clear to overcast
IT
DE
Cloudy
FR
Rainy ES
Snowy
] will be displayed when
11