Lcd-Display; Power Adapter - Explore Scientific Rpw3005 Bedienungsanleitung

LCD DISPLAY
1. Weather forecast display
2. Outdoor and indoor temperature display
(Press [ ] to switch the channel)
3. Time, date and weekday display
[ ] RCC signal received
[ ] Alarm ON

[ ] Low battery indicator
[ ] Ice alert
6


GETTING STARTED
INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon
installation.
3. Reattach the battery door.
NOTE: Replace batteries when [ ] displays, or when
the display is dim.

POWER ADAPTER

Plug the power cable to the power jack and the power
adapter provided to a suitable power outlet.
NOTE: We recommend only using a compatible Type-C
4
input adapter (3.5V 100mA) and insert batteries
as backup power source.
OUTDOOR SENSOR
The main unit can receive data from up to 3 outdoor
sensors. 1 sensor is included with delivery.
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon
installation.
3. Select a channel, then press TX.
4. Reattach the battery door.
5. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TO SEARCH FOR A SENSOR:
The main unit will automatically search for a new sensor
after the batteries are installed. To manually initiate a
outdoor sensor search, press and hold [
NOTE: The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
EN
IT
DE
FR
ES
].
7