Explore Scientific RPW3005 Bedienungsanleitung Seite 5

CLOCK
CLOCK RECEPTION
1. Replace batteries or press and hold [
to initiate RCC receiving.
2. RCC receiving can work in both date mode and alarm
mode.
3. The receiving process takes about 7 minutes.
4. During receiving process, the
signal symbol switches between
.
5. If the RCC receiving process is successful, a completed
RCC symbol [ ] will be shown in the display and
the date and time will be set automatically. If it fails,
RCC setting will quit automatically. Press [
button to re-initiate RCC receiving.
6. RCC receiving will automatically start at 1:03, 2:03,
3:03 every night. If they failed, it would continue at
4:03 and 5:03. Auto receiving function will start at next
1:03 if all failed.
7. To stop RCC reception, press and hold the [
button.
8
8. If the device is still not receiving the signal, please
proceed to set the time manually.
NOTE: When using a power adapter, please place the
] button
main unit as far away as possible from the power
adapter to avoid interference of RCC signal receiving.
SET THE CLOCK MANUALLY
You may set the clock manually if RCC is not available.
RCC
1. Press and hold [ ] button to enter time and date
setting.
2. The setting parameter will flash.
3. Press [ ] button once, the figure will increase
1 unit (when setting minute, second will reset to 0).
Press and hold the [ ] button, the figures will
]
increase rapidly.
4. Press [ ] button once, the figure will decrease
1 unit (when setting minute, second will reset to 0).
Press and hold the [ ] button, the figures will
decrease rapidly.
5. Press [ ] button to confirm setting and enter to
]
next parameter.
6. Sequence of setting: Time zone 12/24 Hr  Hour
 Minute  Year (2000 – 2099)  Date format 
Month  Date  °C/°F  Weekday language  Exit
7. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
LANGUAGE
Five language available,
EN (English), GE (German), FR (French), IT (Italian), ES
(Spanish)
English German French Italian Spanish
Symbol EN GE FR IT
Sunday
SU SO DI DO
Monday MO MO LU LU
Tuesday TU DI MA MA
Wednesday WE MI ME ME
Thursday TH DO JE GI
Friday FR FR VE VE
Saturday SA SA SA SA
TIME ZONE SETTING
To set a different time zone, proceed as follows:
1. Press and hold [ ] button, enter time and date
setting. The display shows the time offset "ZONE 00"
2. Press the [ ] button to increase or
[ ] button to decrease the Time zone offset.
°C/°F SETTING
1. Press and hold [ ] button, enter time and date
setting.
2. Press [ ] button several times until the display
shows °C/°F.
ES
3. Press the [ ] or [ ] button to switch
DO
between Celsius (°C) and Fahrenheit (°F).
LU
ALARM
MA
SETTING/ADJUSTING ALARM TIME
MI
1. Press and hold [ ] button to enter alarm setting.
JU
2. Sequence of setting: Hour  Minute  exit
3. During setting, the setting parameter will flash.
VI
4. Press [ ] button once to increase by 1 or press
SA
[ ] once to decrease by 1. Press and hold the
EN
IT
DE
FR
ES
9